LED High Bay 105 W
Physical specifications
Mass : 3.4kg (2.6kg without reflector)
Dimensions : φt 450mm * ht 265mm, φb 240mm * hb 120mm (without reflector)
Body : Electrostatically coated Die cast Aluminum
Emitting Surface : Borosilicate Glass lens (High temp. resistant) / PMMA Lenses
Reflector :Borosilicate Glass lens (High temp. resistant) / PMMA Lenses
Ingression Protection : IP65
Mechanical Impact resistance : IK08
Mounting : Pendent, M10 Eye bolt (removable) / Surface mounted, adjustable holder
Through fine selection of body material and die casting method, mechanical strength is ensured even against worst of conditions while in the same time providing good heat dissipation maintaining LED life. High quality lenses offer sustained chromatic and photometric properties without compromising strength or hardness. Extra Shield of tempered glass adds even more strength plus chemical stability and invulnerability against extreme harsh weather conditions of highly polluted or high speed wind dust environments. Modular body design allows part exchange. An eye on the future design is a concept realized through a Large heat sink design covering even more than maximum power, along with large driver box allowing variety of devices including upcoming technologies like master control and communication through wireless channels
LED High Bay 105 W
Photometric Characteristics
Light Source : SMD LEDs 3030
Total Luminous flux : 10746 Lumen (+/-1%) @ 102.15W
Efficacy : 105 Lm/W
SLI : 18.659
High efficiency LEDs with precisely selected driver provide high efficacy. Perfectly selected Lenses provide best street lighting characteristics, uniform lighting along with no gaps in between the poles, no unnecessary spread losses and good surrounding illumination. Can easily achieve illumination class requirements for entire ME class along with A1-6 and S1-6 Classes for urban / suburban areas
LED High Bay 105 W
Spectrometry
Correlated Color Temperature(CCT) :3000-4000-6000°K (Daylight)
Dominant Wavelength : 498×300-245×163
Color Rendering index (Ra) : 83
Owing to rich color nature of LEDs used, realistic color rendering is achieved offering correct and precise identification of colors while achieving eye comfort at the same time.
LED High Bay 105 W
Electrical Parameters
Typical power supply : 220VAC, 50Hz, (Max. Limits: 110-305VAC, 50/60Hz)
Supply Limits : 180-295VAC, 50/60Hz
Power :105W
Current : 0.459 A (RMS)
Power Factor : 0.988
Total Harmonic distortion (THDI) : 3.9%
Owing to rich color nature of LEDs used, realistic color rendering is achieved offering correct and precise identification of colors while achieving eye comfort at the same time.
LED High Bay 105 W
Download Datasheet
Sources for software simulation for installation (*.IES, *.LDT files) and advanced test results are available on request Performance described above requires proper installation according to internationally recognized codes and within mentioned operational limitations. Any properties not directly affecting photometric, spectrometric or electrical performance are liable to change without prior notice.