Sold out
Lamina2 100W
LED Street Lighting Luminaire for Urban and Suburban communities
Versatile, modular and highly adaptable
Suitable for both new installations and retrofitting
60-105W
100 Lm/W
IP65
Description
Lamina2 100W
Physical specifications
Mass : 1.6kg
Through fine selection of body material and die casting method, mechanical strength is ensured even against worst of conditions while in the same time providing good heat dissipation maintaining LED life. Light weight and slim for factor offer ease of installation and low mechanical stress on old retrofitting installations. High quality lenses offer sustained chromatic and photometric properties without compromising strength or hardness.
Lamina2 100W
Photometric Characteristics
Light Source : SMD LEDs 2835
Total Luminous flux : 9100 Lumen (+/-3%) @ 100W
Efficacy : 91 Lm/W
SLI : 17.811
High efficiency LEDs with precisely selected driver providevhigh efficacy. Perfectly selected Lenses provide best street lighting characteristics, uniform lighting along with no gaps in between the poles, no unnecessary spread losses and good surrounding illumination. Can easily achieve illumination class requirements for A1-6 and S1-6 Classes for Urban/Suburban areas, along with ME4A for Motorized roads.
Lamina2 100W
Spectrometry
Correlated Color Temperature(CCT) : 6446°K (Pure white)
Dominant Wavelength : 496.6nm
Color Rendering index (Ra) : 85.4
TM-30 Fidelity Index (Rf) :86
TM-30 Gamut Index (Rg) : 96
CQS Qa : 84.67
CQS TLCI : 78
CQS : 83.6
Owing to rich color nature of LEDs used, realistic color rendering is achieved offering correct and precise identification of colors while achieving eye comfort at the same time.
Lamina2 100W
Electrical Parameters
Typical power supply : 220VAC, 50Hz
Supply Limits : 170-400VAC, 50/60Hz
Power : 60-105W (100W Def.)
Current : 0.472 A (RMS)
Power Factor : 0.969
Total Harmonic distortion (THDI) :27%
Surge Protection : 4kV
Due to using high frequency PWM drivers, good electrical properties are achieved for both the grid (minimum distortion and continuous operation even against extreme conditions) and the LEDs (stable current supply independent of grid conditions). Also running the LEDs on high frequency DC pulse wave provides best light vs. thermal performance and guarantees eye comfort (compared to classical gas discharge lighting running on grid frequency))
Lamina2 100W
Art. No.
STLS2-SMD10026501
Lamina2 LED Street Luminaire
100W
6500°K
Lamina2 LED Street Luminaire
100W
6500°K
Your ultimate solution
for suburban and private entities street lighting
Sega-M Warranty: 3 years
Extended warranty : Optional
Sources for software simulation for installation (*.IES, *.LDT files) and advanced test results are available on request
Performance described above requires proper installation according to internationally recognized codes and within mentioned operational limitations.
Any properties not directly affecting photometric, spectrometric or electrical performance are liable to change without prior notice.
Shipping & Delivery
Related products
Cable gland IP 65 with stress relief metric threaded connection. Fiber glass polymide Impact & temperature resistant Grey RAL 7035 Available in different Dimensions 
MCCB DISTRIBUTION BOARD
Medium Voltage -Switchgear, 12 kV up to 17.5 kV Type
-
Saves Lives
-
All switching operations including emergency manual operation switch high-voltage door closed
-
Internal arc tested design up to 40 kA, 1 s, according to IEC 62271-200, VDE 0671-200
-
Peace Of Mind
-
Design based on global best practice sharing and experience
-
Type testing of the circuit-breaker inside the panel
-
Factory-assembled, type-tested switchgear according to IEC 62271-200
-
Use of maintenance-free vacuum circuit-breakers
-
Increases Productivity
-
Use of metallic, earthed shutters and partitions between the compartments ensures highest loss of service continuity of the switchgear (LSC2B according to IEC 62271-200) during maintenance
-
Use of maintenance-free vacuum circuit-breakers
-
Saves Money
-
Use of maintenance-free vacuum circuit-breakers
