Ikthus Shield 105W
Physical specifications
Mass : 5.085kg
Dimensions : L 417mm * W 355mm * T 125mm
Body : Electrostatically coated die cast aluminum
Diffuser : Prismatic glass
Ingression protection : IP65
Swivel : Azimuth 360°, Altitude +/- 100°
Mounting : Wall or ceiling mounted, M6 Bolts / Fischer Screws
Ikthus Shield 105W
Photometric Characteristics
Light Source : 2*COB LEDs, with on-board drivers
Total Luminous flux : 5508 Lumen (+/-1%) @ 102.7W
Efficacy : 53.64 Lm/W
Spread angle : 87.7°
Ikthus Shield 105W
Spectrometry
Correlated Color Temperature(CCT) : 6794°K (Pure white)
Dominant Wavelength : 481.7nm
Color Rendering index (Ra) : 74.9
TM-30 Fidelity Index (Rf) : 74
TM-30 Gamut Index (Rg) : 94
CQS Qa : 70.79
CQS TLCI : 51
Ikthus Shield 105W
Electrical Parameters
Typical power supply : 220VAC, 50/60Hz
Power : 100W nominal
Current : 0.485 A (RMS)
Power Factor : 0.96
Total Harmonic distortion (THDI) : 28.7%
COB LEDs with reflectors and glass diffusers offer a glare free vision along with uniform light distribution in a confined angle. Using on-board drivers for LEDs guarantees reliability and ease of maintenance. Large Die-cast body allows good thermal management.
Ikthus Shield 105W
Art. no.
FL100-COB10027001 LED Floodlight COB DOB 100W 7000°K
Sega-M Warranty: 3 Years
Sources for software simulation for installation (*.IES, *.LDT files) and advanced test results are available on request
Performance described above requires proper installation according to internationally recognized codes and within mentioned operational limitations.
Any properties not directly affecting photometric, spectrometric or electrical performance are liable to change without prior notice.