Sold out
Lamina2 50W
LED Street Lighting Luminaire for Suburban and Private entities
Versatile, modular and highly adaptable.
Suitable for both new installations and retrofitting
10-50W
100 Lm/W
IP65
Description
Lamina2 50W
Physical specifications
Mass : 0.995kg
Through fine selection of body material and die casting method, mechanical strength is ensured even against worst of conditions while in the same time providing good heat dissipation maintaining LED life. Light weight and slim for factor offer ease of installation and low mechanical stress on old retrofitting installations. High quality lenses offer sustained chromatic and photometric properties without compromising strength or hardness.
Lamina2 50W
Photometric Characteristics
Light Source : SMD LEDs 2835
Total Luminous flux : 5000 Lumen (+/-3%) @ 50W
Efficacy : 100 Lm/W
Maximum Luminance : 2657 Candela @ 50W
SLI : 17.305
High efficiency LEDs with precisely selected driver providevhigh efficacy. Perfectly selected Lenses provide best street lighting characteristics, uniform lighting along with no gaps in between the poles, no unnecessary spread losses and good surrounding illumination. Can easily achieve illumination class requirements for A1-6 and S1-6 Classes for Urban/Suburban areas, along with ME4A for Motorized roads.
Lamina2 50W
Spectrometry
Correlated Color Temperature(CCT) : 6300°K (Pure white)
Dominant Wavelength : 494.9nm
Color Rendering index (Ra) : 81.5
TM-30 Fidelity Index (Rf) :83
TM-30 Gamut Index (Rg) : 95
CQS Qa : 81.75
CQS TLCI : 71
CQS : 80.5
Owing to rich color nature of LEDs used, realistic color rendering is achieved offering correct and precise identification of colors while achieving eye comfort at the same time.
Lamina2 50W
Electrical Parameters
Typical power supply : 220VAC, 50Hz
Supply Limits : 170-400VAC, 50/60Hz
Power : 10-50W (50W Def.)
Current : 0.246 A (RMS)
Power Factor : 0.971
Total Harmonic distortion (THDI) :23.4%
Surge Protection : 4kV
Due to using high frequency PWM drivers, good electrical properties are achieved for both the grid (minimum distortion and continuous operation even against extreme conditions) and the LEDs (stable current supply independent of grid conditions). Also running the LEDs on high frequency DC pulse wave provides best light vs. thermal performance and guarantees eye comfort (compared to classical gas discharge lighting running on grid frequency))
Lamina2 50W
Art. No.
STLS2-SMD05026501
Lamina2 LED Street Luminaire
50W
6500°K
Lamina2 LED Street Luminaire
50W
6500°K
Your ultimate solution
for suburban and private entities street lighting
Sega-M Warranty: 3 years
Extended warranty : Optional
Sources for software simulation for installation (*.IES, *.LDT files) and advanced test results are available on request
Performance described above requires proper installation according to internationally recognized codes and within mentioned operational limitations.
Any properties not directly affecting photometric, spectrometric or electrical performance are liable to change without prior notice.
Shipping & Delivery
Related products
Cable Compartment
-
Cable Compartment
-
Standard
-
Cable entry from bottom, earth bar and bushings to the switching device compartment
-
Variations
-
Cable fault making earth switch (25kA/1s) Current Transformer
-
Block Type
-
Voltage Transformer, Block type Cable connections up to 4 cable / phase Lightning arrestor
-
Gland plate
-
Steel, Aluminium, Stainless Steel, Brass Cable entry
-
Top, adds additional 600 mm cable box
Cable gland IP 65 with stress relief metric threaded connection. Fiber glass polymide Impact & temperature resistant Grey RAL 7035 Available in different Dimensions 
MCCB DISTRIBUTION BOARD
Classification, dimensions, room planning
