LED WEATHER PROOF LUMINAIRE

Mass : 0.85/1.325kg (Size 1/2)
Dimensions : L 670/1270 (Size 1/2) * W 70 * h 80mm
Body : Poly carbonate

Diffuser : Milky poly carbonate 

Ingression Protection : IP65
Mechanical Impact resistance : IK08
Mounting : Surface mounted (wall/ceiling) or pendent with M4/M6 Fischer screws
Running temperature : -20 to 50°C

Body and diffuser made of polycarbonate (PC) offer great stability in wide range of operating temperature. They also offer rigidity and chemical stability (against mineral salts, acids, alkalis and alcohols). Body height is sufficient for inserting additional components (i.e. emergency configuration components; batteries, chargers etc.) Highly efficient clamps offer durability and easy use. Internal drop cords and hinge clamps allow removing components for maintenance without the need to disassemble the whole body. Slim form Factor has a positive impact on Photometric properties along with sleek look.

Light Source : SMD LEDs
Total Luminous flux : 2195/4220 Lumen (+/-1%) @ 21.34/40.27W (Size 1/2)

Efficacy : 103 Lm/W
SLI : 131°

For manufacturing plants and factories lighting

Correlated Color Temperature(CCT) : 3000-6000°K
SRI : 83

LED Weatherproof luminaire (Slim)

Typical power supply : 220VAC, 50Hz
Power : 18/36W (Nominal)
Current : 0.113/0.187 A (RMS)
Power Factor : 0.9
Total Harmonic distortion (THDI) : 12.7%

Due to using high frequency PWM drivers, good electrical properties are achieved for both the grid (minimum distortion and continuous operation even against extreme conditions) and the LEDs (stable current supply independent of grid conditions). Also running the LEDs on high frequency DC pulse wave provides best light vs. thermal performance and guarantees eye comfort (compared to classical gas discharge lighting running on grid frequency)