Description
Mass : 0.44 kg (3W) / 1.215kg (12W) / 4.1kg (36W)
Dimensions : φ102mm*h90mm (3W)
/ φ180mm*h90mm (12W)
/ φ300mm*h90mm (36W)
Body : Stainless steel ring, Die cast aluminum heat sink, ABS outer shell
Diffuser : Clear glass, tempered, 8/12mm thickness
Ingression protection : IP67
Mechanical impact resistance : IK08
Mounting : Ground embedded ABS cylinder
Light Source : SMD LEDs
Luminous Efficacy : 60.83 Lm/W @3W , 72.43Lm/W @12W , 78.69Lm/W @ 36W
Spread angle : 32° (Symmetrical)
Correlated Color Temperature(CCT) : 3000-3500°K (Warm white)
Dominant Wavelength : 581.4nm
Color Rendering index (Ra) : 62
TM-30 Fidelity Index (Rf) : 64
TM-30 Gamut Index (Rg) : 92
CQS Qa : 62.65
CQS TLCI : 26
Typical power supply : 220VAC, 50/60Hz
Power : 3/12/36w
Current : 0.033/0.106/0.32 A (RMS)
Power Factor : 0.5
Total Harmonic distortion (THDI) : 150-180%
Owing to the special nature of application (water
flooding possible) it is strongly recommended to supply this product through Earth fault/leakage protected supply as per national code.
LED offers an optimum solution for up light, since it offers better efficacy than conventional solutions along with a wide range of white color shades and powers. Lenses enable a narrow beam that can cover heights up to 20 meters with beautiful artistic effect
SPCI11-SMD00323001 LED Up light circular 3W 3000°K
SPCI12-SMD01223501 LED Up light circular 12W 3500°K
SPCI13-SMD03623501 LED Up light circular 36W 3500°K
Sega-M Warranty: 3 Years
Sources for software simulation for installation (*.IES, *.LDT files) and advanced test results are available on request
Performance described above requires proper installation according to internationally recognized codes and within mentioned operational limitations.
Any properties not directly affecting photometric, spectrometric or electrical performance are liable to change without prior notice.