Ikthus Shield 105W
Physical specifications
Mass : 10.85kg
Dimensions : φo 365mm * φb 190mm, hr 160mm,
hb 240mm, ha 215mm , ht 505mm
W 285mm * Ws 420mm
Body : Electrostatically coated die cast aluminum
Diffuser : Segmented specular within electrostatically coated Press formed aluminum sheet shield
Ingression protection : IP65
Mechanical impact resistance : IK08
Mounting : 3*M10/12 Bolts on swivel arm -/+100° or pendent
Ikthus Shield 105W
Photometric Characteristics
Light Source : SMD LEDs 3030
Total Luminous flux : 42666 Lumen (+/-1%) @ 466.5W
Efficacy : 91.5 Lm/W
Spread angle : 31°
Ikthus Shield 105W
Spectrometry
Correlated Color Temperature(CCT) : 2898°K (warm white)
Dominant Wavelength : 583.4nm
Color Rendering index (Ra) : 83.2
TM-30 Fidelity Index (Rf) : 84
TM-30 Gamut Index (Rg) : 97
CQS Qa : 83.75
CQS TLCI : 50
Ikthus Shield 105W
Electrical Parameters
Typical power supply : 220VAC, 50/60Hz
Supply Limits : 170-400VAC, 50/60Hz
Power : 500W nominal
Current : 2.155 A (RMS)
Power Factor : 0.987
Total Harmonic distortion (THDI) : 10.5%
Designed originally for large areas outdoors lighting, with desirable characteristics which make installation easy and fit for different kinds of mounting. Narrow spread angle guarantees best performance out of high masts onlooking large areas i.e. football pitches and also high altitude pendent configuration. Reflector chamber equipped with air vent prevents build up of pressure inside compartment due to operating heat. Large area heat sink featuring totally sealed coolant filled pipes guarantees best heat dissipation. Driver placement allows easy maintenance and ensures minimum heat transfer from heat sink to drivers. Rugged adaptable construction allows precise adjustment in all directions for high mast mounting and pending holder makes for extra safety or allowing pendent configuration.
Sega-M Warranty: 5 Years
Sources for software simulation for installation (*.IES, *.LDT files) and advanced test results are available on request
Performance described above requires proper installation according to internationally recognized codes and within mentioned operational limitations.
Any properties not directly affecting photometric, spectrometric or electrical performance are liable to change without prior notice.