Mass : 0.28kg
Dimensions : φ 90mm * t 110mm * hs 210mm
Body : Die cast aluminum body + spike
Reflector : Segmented specular
Diffuser : Tempered clear glass
Ingression protection : IP65
Mechanical impact resistance : IK08
Mounting : Dirt / soil direct plunger
Light Source : COB LED
Luminous Efficacy : 239 Lm
Spread angle : 69.7° (Asymmetrical)
Correlated Color Temperature(CCT) : 3382°K (Warm white)
Dominant Wavelength : 580.5nm
Color Rendering index (Ra) : 83.2
TM-30 Fidelity Index (Rf) : 84
TM-30 Gamut Index (Rg) : 93
CQS Qa : 84
CQS TLCI : 59
Typical power supply : 220VAC, 50/60Hz
Power : 6W nominal
Current : 0.06 A (RMS)
Power Factor : 0.465
Total Harmonic distortion (THDI) : 181.7%
Owing to the special nature of application (water
flooding possible) it is strongly recommended to supply this product through Earth fault/leakage protected supply as per national code.
LED offers an optimum solution for garden spike, since it offers better efficacy than conventional solutions along with a wide range. Reflector enables a wide beam that can cover a large area suitable for shrubs lighting.
SPCI18-COB00623501 LED Garden Spike 6W 3500°K
Sega-M Warranty: 3 Years
Sources for software simulation for installation (*.IES, *.LDT files) and advanced test results are available on request
Performance described above requires proper installation according to internationally recognized codes and within mentioned operational limitations.
Any properties not directly affecting photometric, spectrometric or electrical performance are liable to change without prior notice.